Vacuum degasser for drilling fluid processing and the complete drilling fluid system are a new type of oil drilling component system which has been developed from inorganic drilling fluid system and are very beneficial in the protection of the oil reservoir. Thanks to the vacuum degasser for drilling fluid processing solid free system, the damage of solid particles on a given oil rig can be greatly eliminated, which is especially true in the case of low permeability oil layer.
How to protect vacuum degasser in the usage phase:
1. Open the header and clean the inside with hot water or sodium hydroxide solution before each use.
2. Keep every sealing part good when using. There can’t be a leakage phenomenon.
3. Check the diaphragm manometer frequently and maintain its accuracy.
How to protect vacuum degasser in the design phase:
1. Generally, we can install the vacuum degasser on any point of heating refrigeration system. But it is best to install it on the return route of the system.
2. The distance between the device and the wall should be less than 50mm. The distance between the device and the