this is a paper that is equal in length to the skull, with a well-defined stop. The color of the nose depends upon the color of the dog's coat. It is black in gray, tan or black dogs, liver in copper dogs and flesh-colored in pure white dogs. The medium-sized, oval-shaped eyes are moderately spaced and come in blue, brown, amber or any combination thereof. Eyes can be half blue and half brown (parti-eyed), or dogs can have one blue eye and one brown eye (bi-eyed). The erect ears are triangular in shape, and set high up on the head. The teeth meet in a scissors bite. The tail is carried over the back in a sickle curve, not curved to either side when the dog is excited. The large "snow shoe" feet have hair between the toes to help keep them warm and for gripping on ice. Dewclaws are sometimes removed. The medium-length, double coat is thick and can withstand temperatures as low as -58° to -76° F (-50° to -60° C). The coat also comes in a longhaired variety called a wooly coat. The wooly (sometimes spelled woolly or wooley) coat length comes from a resessive gene and is not in most of the kennel club's written standard. Coat colors include all, from black to pure white, with or without markings on the head. The face mask and underbody are usually white, and the remaining coat any color. Examples of common colors are black and white, red and white, brown, gray and white, silver, wolf-gray, sable and white, red-orange with black tips, dark gray and white. Piebald is a very common coat pattern.TemperamentSiberian Huskies are loving, gentle, playful, happy-go-lucky dogs that are fond of their families. Keen, docile, social, relaxed and rather casual, this is a high-energy dog, especially when young. Good with children and friendly with strangers, they are not watchdogs, for they bark little and love everyone. Huskies are very intelligent and trainable, but they will only obey a command if they see the human is stronger minded than themselves. If the handler does not display leadership, they will not see the point in obeying. Training takes patience, consistency and an understanding of the Arctic dog character. If you are not this dog’s 100% firm, confident, consistent pack leader, he will take advantage, becoming willful and mischievous. Huskies make an excellent jogging companion, as long as it is not too hot. Huskies may be difficult to housebreak. This breed likes to howl and gets bored easily. Does not do well if left alone for a long period of time without a great deal of exercise beforehand. A lonely Husky, or a Husky that does not get enough mental and physical exercise can be very destructive. Remember that the Husky is a sled dog in heart and soul. It is good with other pets if raised with them from puppyhood. Huskies are thrifty eaters and need less food than you might expect. This breed likes to roam. Siberian Huskies can make wonderful companions for people who are aware of what to expect from these beautiful and intelligent animals and are willing to put the time
Sheffield International College
AS1b SE FC
Title:Lab report of the constant of elasticity
Elasticity experiment report
In physics, elasticity is the tendency of solid elastomeric material, while after deformation recovering to the original shape. And spring is one of the elastic objects which can return to the original size when forces were…
ANATOMY & PHYSIOLOGY CLASS: WRITING LAB REPORTS
The following is an explanation of the format that is to be used for writing lab
reports. There will be lab activities for each Chapter in the textbook.
1. Lab Report grades are given the same value as a test grade. It is very
important that they be done correctly and thoroughly.
2. All lab reports should be typed using Times New Roman and only 12 font.
3. In the upper left hand corner include your name, high school, and A & P…
CHM1032L pre/post lab instructions
Preparation is a key to success in this lab. For this reason, you are required to thoroughly read through the experiment information presented in the lab manual, and complete a pre-lab for each experiment you do. The prelab must be completed prior to the day of the experiment. Each Friday I will ask to see your completed prelab before I allow you to enter the lab. If you have not finished the pre-lab, I will not allow you to enter the lab and you will receive…
Spectroscope Lab Report
Abstract: The purpose of the Spectroscope lab is simple. It is basically to see the spectrum of different light sources. Some of the light sources included are sunlight and a candle. It focuses on the difference between their spectrums.
Background: Electromagnetic Spectrum - The range of wavelengths…
Kinetics Lab Report
Chemistry 152, Fall 2013
5 September 2013
For this experiment the main objectives were to determine the best wavelength to use for a Beer’s Law Analysis for the dye assigned which happened to be brilliant blue. The molar absorptivity of Brilliant Blue at 622.0 nm had an absorbency of 0.321. These results were obtained by completing a series of five cuvets…
Lab report #5
In this experiment, we used a nearly frictionless surface to compare velocity characteristics to that of momentum, suing different weights, as well as bouncing carts and sticking carts together. This is important to understand, because momentum is a combination of weight and velocity, where as velocity is independent of weight.
The materials we used for this experiment include 2 carts, with weights of 139.7 grams and 290.4 grams. We also used springs on the ends to “bounce”…
MEC 325/580 Lab Report
CNC Machining Lab Report
Date: March 18, 2013
Group Leader: Jian Wu
Group Number: G4
Regment No.: D
1.Objective and introduction.
2.Principles and practice.
3.Design and result.
4.Conclusion and recommendations.
1. Objective and introduction
Operate the CNC milling machine using G-codes, M-codes in a CNC program.
* Equipment: Minitech CNC machine (Series 2)
I have completed this lab report in accordance with the NA Honor Code.
An Introduction to Calculating Density
Purpose: To determine the density of different substances using mass and volume measurements that have been calculated. Also, to familiarize oneself with the materials in the laboratory and to investigate the precision of measurements using precision of error.
Hypothesis: If the density of a solid and…
DO NOT COPY ANY MATERIAL FOR THIS REPORT. IF YOU COPY FROM THE LAB MANUAL OR ANOTHER SOURCE YOU WILL RECEIVE A ZERO FOR THE REPORT. WRITE EVERYTHING IN YOUR OWN WORDS.
Experiment (Input Number): (Type full title here.)
Class Title and Section
Instructor: Katherine Walton
In this section you will discuss about the purpose of the experiment. It should only be a few sentences long and should include information pertaining to what it is you are trying to analyze…
T - temperature, K
TcA, TcB - critical temperatures of A & B respectively, K
VcA, VcB - critical molar volumes of A & B respectively, cm3/ g mol
RESULTS AND DISCUSSION
CONCLUSTIONS AND RECOMMENDATIONS
The setup of this lab was very straight forward. Once the chemicals were chosen they were carefully poured into the test tubes. P-xylene and cyclohexane were chosen because of their insolubility with water. It was difficult to determine the height with great accuracy using…