Nt1310 Unit 6 Research Paper

Words: 729

Pages: 3

Open Document

Figure 16: Mandibular acrylic record block with four hooks.

Figure 17: Metal housing with black processing male and the white block-out spacer ring and plastic strip in place on the model.

Figure 18: Black processing inserts were picked up to the fitting surface of the record block.

Figure 19: Fixation of the blue nylon inserts into the metal housing using the locator tool. Measurement of retention (vertical dislodging forces).
- A universal testing machine* was used to apply and measure tensile dislodging forces.
- A metal plate with four tapped opening (holes) was attached to the chains by secews. Another chains was screwed into the center of the metal plate to unite the plate with its four chains to the crosshead of the machine. (Fig20)
- …show more content…
(Fig21)
- The four chains were balanced (adjusted) by tightening the screws connected to the plate before each measurement to reduce slacks to minimum [6, 145].
- An acrylic bar projection was constructed at the base of the test model and orientated anteroposteriorly across the center of the cast which stabilized with a clamp to a stainless steel plate fixed to the testing machine[145].
- The testing machine comprises of 2 vertical arms and a crosshead at right angle to the 2 arms. A load cell is attached to the crosshead to control its speed and directions, which was adjusted to move in tensile mode by a PC controlled programming, which allow the collection of information.
- The occlosal plane of the test model was set even with the horizontal plane of a metal plate of the universal testing

Nt1310 Unit 6 Research Paper

A. Star Topology: In the star topology, there is one controller of the network to which the communication is established. This prime controller of the network is called the coordinator. The PAN coordinator may be mains powered as it should be installed permanently and always should be alive, while the rest devices or nodes will most likely battery powered due to its portable in nature. Applications that follow this topology include home automation, small office automation, personal computer (PC)…

Words 562 - Pages 3

Nt1310 Unit 6 Research Paper

talks about the electric potential distinction between two focuses is the work done per unit charge in moving a charge between those two focuses. It takes work to move a charge against an electric field. Pretty much as with gravity, this work builds the potential vitality of the charge. Generally as with the electric field, it is helpful to characterize an amount that is the electric potential vitality per unit charge. This is known as the electric potential. For a couple of oppositely charged parallel…

Words 645 - Pages 3

Nt1310 Unit 6 Research Paper

1) Hydrogen can keep burning in its core about 10 billion years for a Sun-like star. 2) It’s an important event because without the fusion of Hydrogen into helium, the core no longer has an energy source and gravity is able to collapse it, forcing major changes in the entire structure of the star. 3) As it becomes further from its main sequence, its equilibrium becomes unstable. Its helium core becomes unbalanced and starts to shrink. The rest of the core also becomes unbalanced as it fuses hydrogen…

Words 596 - Pages 3

Nt1310 Unit 6 Research Paper

1.Install the motherboard Start up by opening your case. You’ll have to unscrew a couple of screws to slide open the side panels. To start, open up the motherboard and take out the IO shield (the plate that covers the ports on your motherboard) there will be a large space for it on the case. Snapping it into place might take a bit of force, but you must make sure all 4 sides are firmly in place. Now, place your motherboard on the bottom of the case so the ports line up with the IO shield. This will…

Words 1113 - Pages 5